Form of Supply
All sizes are available (both flat and round).
-
Call
+91 33 79657514
-
Whatsapp
+91-8777303485
-
EN-353 Case Hardening Steel
EN-353 Case Hardening Steel
Application : Automobile Industry,
Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry
EN-353 is a case-hardening steel with low carbon content but good hardenability reaching good wear resistance due to high surface hardness after hardening. The small grain size benefits in good ductility and fatigue strength. This combination of properties provides wear resistance and fatigue strength at the surface, and impact strength in the core. Presence of Nickel and molybdenum increases ductility and toughness and resistance to corrosion.
EN-353 is a case-hardening steel with low carbon content but good hardenability reaching good wear resistance due to high surface hardness after hardening. The small grain size benefits in good ductility and fatigue strength. This combination of properties provides wear resistance and fatigue strength at the surface, and impact strength in the core. Presence of Nickel and molybdenum increases ductility and toughness and resistance to corrosion.
Chemical Composition% :
Applications :
Additional Information : Item Code: EN-353
| C | Mn | Si | S | P | Cr | Ni | Mo |
| .20 MAX | .50 - 1.00 | .35 MAX | 0.04 | 0.04 | .75 - 1.25 | 1.00 - 1.50 | .08 - .15 |
Applications :
- Heavy vehicle & Automobile transmission parts, General Engineering Works
- Ball & Roller Bearings, Gear Shafts, Spinning Tools etc
Additional Information : Item Code: EN-353
