Carbon steels are highly economical and cost saving alternatives to alloy steel and stainless steel grades. Depending on the content of carbon, carbon steel rod manufacturers in India segregate the alloys into low, medium and high carbon steels. The primary consumers of these bars, according to many carbon steel round bar manufacturer are the oil and gas industry. The pressure applied during transmission in the oil and gas industry tends to be really high.
Features of Carbon Steel Bar :-
Can be exposed to high stresses
Great resistance against wear
Withstand high impact and bending
Robust steel with higher resistance to wear
Using pipes in such cases may not be a feasible option. Since a carbon steel hollow bar is constructed with thicker cross sectioned walls, it could be used for high velocity transportation of oil and gas. Generally, carbon steel round bar suppliers recommend using these bars in instances where toughness and hardness, with minimal ductility, is required. The higher the content of carbon present in the alloy of 1045 carbon steel hex bar, the harder the component is.
Form of Supply
All sizes are available (both flat and round).
Mainly the economical value of this alloy is lower on account of only carbon and iron being the alloyants in the carbon steel square bar. Though carbon steel just contains these two elements, some components may contain residual elements such as manganese, silicon and copper in the alloy of carbon steel angle bar. Yet, the percentage of these elements in the carbon steel flat bar must be less than 1.65 wt.
