Channel

Channel

Mankrida Steel supplies a wide range of Mild Steel (MS) Channels. MS Channels are used for manufacturing of truck-trailers, Tippers, generators frames, EOT cranes, ship building, factory sheds, conveyors, Cable Trays, boilers, agricultural equipment, Bus body, Mechanised parking system, construction of bridges and many more engineering industries.

Size in mm	Average Weight
	KG/MTR	KG/FT
70 x 35	4.20	1.30
75 x 40	5.20	1.58
75 x 40 STD	7.10	2.20
75 x 40 MED	6.50	2.00
75 x 40 LIGHT	5.70	1.70
100 x 50 STD	9.56	2.90
100 x 50 MED	9.20	2.80
100 x 50 LT MED	8.70	2.60
100 x 50 LIGHT	7.90	2.40
120 x 55	12.5	3.10
125 x 65	13.10	4.00
150 x 75	16.80	5.10
200 x 75	22.30	6.80

Rolling Tolerances

Web Flange Sectional weight Length up to 200 mm ± 2.5 mm above 200 mm ± 3 mm upto 100 mm ± 2 mm ± 2.5 % For fixed length : ± 100 mm

The data given above is indicative. Actual weights may vary. Mankrida Steel developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.